Can Tianya Limestone provide project-specific laboratory reports and physical samples?

Yes. Contact our engineering desk at info@tianyastone.com to request SGS ASTM/CE/AS 4586/GOST test reports, CAD details, and complimentary sample swatches.

Where to Place Movement & Expansion Joints in Large Exterior Limestone Terraces (BS 7533 / TCNA EJ171)

RenWork V4 Verified Engineering Conclusion (RW-TYBLOG-0423)

Executive Takeaway for Specifiers & Importers

Install 8–10mm flexible polyurethane or neutral-cure silicone movement joints every 3.6–4.5m outdoors, along all building perimeters, and directly above every structural concrete slab control joint.

1. Architectural Context & Technical Scope

Preventing thermal tenting and reflective slab cracking across sunlit outdoor terraces and pool decks. When specifying natural limestone for high-value residential villas, hospitality resorts, or commercial facades, decisions must be anchored in laboratory-verified petrographic and mechanical data rather than generic trade assumptions.

2. Verified Tianya Limestone Reference Benchmarks

Benchmark Parameter	Verified Factory & Laboratory Standard	Reference Module
Petrographic Class	ASTM C568 Category III High-Density Limestone (2,650 kg/m³)	Module 04
Water Absorption & Frost	0.85% – 1.80% (ASTM C97) · 100 Cycles Passed / F100 (ASTM C666 / GOST 30629)	Module 06
Calibration & Pre-Shipment QC	±1.0mm CNC Calibration + 3,000 m² Dry-Lay Hall Photo Approval	Module 02
20GP Container Utilization	20mm: ~500 m² \| 30mm: ~320 m² \| 50mm: ~190 m² (27 MT Payload)	Module 05

3. Practical Specification & Procurement Checklist

Verify Density & Absorption First: Ensure project specifications mandate ASTM C568 Category III (≤ 1.8% absorption) and wet pendulum slip resistance matched to the micro-environment.
Request Good / Better / Best Container Options: Compare 20mm mortar-bonded slabs against 30mm heavy-duty pavers and custom CNC coping to optimize landed cost per m².
Lock in Physical Control Samples (`SMP-`): Approve physical swatches and our 3,000 m² factory dry-lay layout photographs prior to ISPM-15 crating.

← Back to All 44 Engineering Guides Browse 29-SKU Technical Data Sheets →